Search results for query: *

I'm a fan of K1 style plastic media too, but they won't work as well in a Tidal filter as its a bottom-up flow design, so the media would end up getting pushed over the weir if loose unless you add some sort of DIY grill. You could put it in a bag, but you risk a lot of bypass unless it's...

What about seed pods, like poppy etc

Hi all, Looks like it may be magnesium (Mg) deficiency, which causes <"interveinal chlorosis"> on older leaves. Has anything changed recently, like a <"different water supply"> or fertiliser regime? If it has? I'd go back to what you were doing before. Because these are mobile nutrients (any...

I went for an Airstone in the end, well, Limewood diffuser would be more accurate. They don’t last that long but I make my own.

I've had my S. Repens as a "carpet in progress" for about a year, and they've been grouwing veryy slowly but surely. About a week ago I noticed the lower leafs started turning yellow and holes appeared in them. I removed them, but the problem reappeared two days later, see pic below. Does ayone...

How about two Aquael pat mini filters, one each end of the tank? They have an adjustable flow rate & flow direction. It's also pretty easy to change the filter sponge for a larger one or different coarseness with a little DIY!

Nope, l ensure the level is constant, it’s just started up again! May have to ditch this surface skimmer approach, it wasn’t like this with a standard glass return.

Used 3 pieces of horn wood, some seiryu stone. Plants are Eleocharis Pusilla, Eleocharis Parvula, Eleocharis Montevedensis, have chucked a couple small Anubias in also.

Hmm... I think I see two filter intakes, two jet pipes, a spray bar and what I assume to be two temperature probes? :woot:

Were the issues maybe due to changes in water level?

Or this. https://www.allpondsolutions.co.uk/products/650lh-650-cif?currency=GBP&variant=45370049036573&utm_source=google&utm_medium=cpc&utm_campaign=Google%20Shopping&stkn=f20b45b292d8&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2Cv1FZWPQMw78Ih74U1TZP0G1IVUEwEsrrsu9jFei2hDtcaCskgy144hoCRygQAvD_BwE

I had an Eheim internal filter once and that had a sponge behind the inlet screen so that should have been shrimp safe. You don’t get huge flow though from the internal filters I’ve seen. You might need two on a 90L? Edit: Maybe something like this?

Only option I see then are HOBs or under gravel filters. Will this be a planted tank? If so I wouldn't go with an undergravel filter. Just my opinion.

Thanks for the option, but its not a shrimp only tank and I wanted something with more flow. I don't have the space for a canister filter and I don't mind paying for a good option. I don't really want a sponge filter because as mentioned the look.

where can I find this study for Under Water plant? Evidence should be taken from both sides, one with BBA and one without BBA while using the same method (in this case EI method) and so far the Evidence does suggest that there are Many/More EI users with BBA issues. I don't think we should...

I’ve had a couple of surface skimmers over the years and none of them worked reliably. This was the first type I used many years ago. Sometimes it worked sometimes it didn’t but it never sucked in any air.

Be interesting to hear your thoughts on the Eheim and / or Fluval Bradders…… I’ve ran JBL’s, Eheim, TetraTec and manufacturers of external filters l can no longer recall in the past, none have behaved like my Oase 600, if it weren’t for the prefilter and integral heater l would have gone back to...

Hi Andy, I believe some people have talked about this on this thread as well. to answer your question if there is any link between Iron and BBA ? the answer is Yes. Excess Iron and Phosphate react with each others and when such event occurs, they both are reduced. Iron, especially in form of...

I think sponge is a good idea - albeit they are a little ugly in the tank. But a lot of people use them with a pump and (with occasional light cleaning) get reasonable filtration from them. The other option might be under gravel filtration. It’s old-school - but they do work! I am assuming a...

Unless you like that sort of adventure of course!

Just a suggestion, but instead of bioballs and ceramic rings, why not fill it up with K1 media? The surface area on the K1 is significantly more. I know you have a lot of plants and other filters anyway - but if you are going to fill it up with something try 3 litres of that.

A red pill moment while sitting in my apartment in Kyrgyzstan experiencing an earthquake sipping wine sounds like the start of a superb story.... clearly one that needs to be told in full over a glass or two of wine!

And I'm ordering the Nano this weekend for my desk. I didn't get on with the APS one very well. So going back to the tried and tested nano I've used in the past. Will catch some shrimp from the main tank and add to it once ready. I left the hatdscape from the badis tank in here. So that I...

I've gone for a Tidal 110. Don't think k I've had one of seachem filters before. And I can mess about with planting up the compartment with creepers/climbers etc. Think I'll just fill it with bio balls and rings for surface area colonisation. Also for the heat we're 🔥 having atm have added a...

Sponge filters. There isn't anything safer than that. You can either power it with an air pump or a water pump. Entirely up to you. As for which sponge filter specifically well, there are plenty of models out there but they all do the same. You just have to pick up any you fancy. Only...

CO2 arrived today, ordered from acres aquatics as they had it for a great price, first time ordering from them and I’m very pleased with the service, I accidentally selected pick up in store and they called me to check and changed it to delivery with no fuss! The tank (from proshrimp) and some...

Hello folks. I am setting up a 90l 60cm tank and would love your suggestions on a internal filter that is shrimp safe. Cheers malik

@Yamato check above post.

I built this stainless system recently. It’s a Parker IR6000 regulator with Swagelok needle valve.

MFS = Multiple Filter Syndrome!

I personally would go with the Complete as I would imagine (without looking) that Lite does not contain any Nitrate or Phosphate which are two of the Macro elements most plants need to thrive. You could get away with using Lite while the Aquasoil is new but with a tank that size a bottle is...

Hello, Nothing to do with nutrients and everything to do with the inability of the old leaves to source CO2 from the water column. Keeping the light intensity low during this transition will reduce the demand for CO2. Flow is not really an issue in a non-CO2 injected tank. Look...

Yes, CO2 is toxic as Hell. You can kill fish faster with CO2 than with "new tank" ammonia/nitrite syndrome. Having said that it's a certainty that if the hobbyist is dosing CO2 at a rate that negatively affects the fish but that does not turn the DC green it means that something else in the...

Sorry but there is zero relationship between Iron and BBA. EI dosed tanks have high Fe without necessarily incurring this penalty. In fact, studies have shown that Fe can be dosed up to approximately 13ppm before becoming toxic to plants. I myself, for the EI article dosed up to 3 ppm Fe with no...

Hello, Anaerobic zones should be avoided where possible. The idea of a planted tank is to oxygenate both the water and sediment in order to improve the health of plants and fish. Oxygen promotes the rise of the good bacteria and supplements the availability to the fish. Plants send oxygen...

Yes, this is not correct. As mentioned, CO2 saturation in water has nothing to do with carbonate concentration in the water. The effect that carbonate has in the water column in it's interaction with CO2 is purely that of change in pH. CO2 dissolves in high carbonate content water in exactly...

Haha life gets in the way mate. Experienced an earthquake on the other side of the Kyrg mountains while sipping wine in my high rise appartment. I immediately thought to myself: "Self, this is not sustainable..." Talk about a red pill moment...:crazy: Cheers,

Cheers mate! (or maybe something like "Ура!"):wave:

It doesn't actually work this way. In the steady-state situation (after all the moving pieces become stable and stop moving, for example 2 hours after you've been injecting CO2 gas) the amount of CO2 dissolved in the water (what we care about) is independent of the pH of the water and also...

Good idea. I already have to grease the pre filter seal otherwise it does not seal correctly. I will grease up the main seal and also the Heater seal to see if this makes a difference.

Here's a tip. If you've already checked all the typical seals (head gasket, hose adapter, priming pump), checked for any intake restrictions and it's still pulling in air, take apart the priming pump to lube the blue priming head. After lubing it, most of my air purging problems went away...

Me too. I’ve come to the conclusion that nearly all the external canister filters on the market have too many gimmicks. It’s not surprising we hear so many complaints of leaks and excess noise etc.

I'll let you count all the equipment (temporarily) in this aquarium. :D Just don't ask what the hell I am doing ....

The Biomaster has very many rubber seals due to the complex design. This makes many entry points for air if seals are not perfect and/or the flow at inlet is somewhat restricted (such as partially blocked pre-filter). A seal that is water tight might not be air-tight. Greasing all of the rubber...

I am similar and have been swapping out a fair bit of kit, it can certainly be fun tinkering :). Of course, not a problem!

Somewhat obsessive according to my wife! I do love mechanics and technology, and I like to fully understand something's capability. Hence the incessant tinkering! That is very, very kind of you. And may take you up on that! Thank you.

Just an update. Added 3 more Mollies and 2 Banded Trochus Snails. I also found 2 Molly babies in the bag and I raise them in an isolation box in the DT. I was quite surprised when I noticed them in the acclimation tub. Hardy little buggers! I also bought my first coral frags: Duncan Gold...

Biomasters seem to have some inconsistent QC or something, people saying their units were quiet and both of mines very noises, new plate improved the noise on mines as well as purging, others have the opposite effect…not sure what’s going on, I hope it somehow gets better pm your unit, might be...

BTW - I am going to (once I have time) extensively play around with my new 350 and see if I can work out what is going on. I am (rather sadly) also going to get hold of an EHEIM Pro 5 and a yet-to-be-decided flavour of Fluval and start putting them through their paces as well. I don't know...

Yep, when I bought the Biomaster 350 a few weeks ago it had this new plate in it and the same symptoms. I am not convinced this is doing much good, but all the new units have them as standard. My 250's are air free - well, they are not making any sounds anyway.

This. It is not clear how many gaps there are and how big they are. If it is only one gap just large enough for a small fish to swim through then I would suspect a relatively high percentage of the flow is going through the gap. If there are several such gaps then the flow will almost excusively...

Mine seems to have made it worse 🫤 I’ve tried to refit it multiple times, but had enough for tonight now, so will see if it beds in. I left it for 30 mins, but soon as I nudged filter it purged loads off air, then I had to keep slanting it to remove more air. Will see if it improves 🤞

Fair enough. I just think in terms of filtration, gaps cause the path of least resistance, and water will do its best to go around rather than through. I would try and plug it for filtration and (and you say) fish though.

Having used pressurised CO2 and had plenty of low energy non CO2 ,l will say you can have a successful aquarium without CO2, trick is to choose yor plants carefully,l like to have just two or three different species keep up with maintenance and water changes. I use soft water but if l didn't...

Dates clash terribly for me, else I’d have made the effort for this 😩

It isn't clear from this post, but looking at the FTS from her journal, the matten filter is very large, so the openings on the side are relatively small and probably won't affect much in terms of filtration. That said, I would also try to prevent any gaps and make it water tight for the sake...

Totally agree with this. In filtration terms, through - not around - is best.

Hi, no just a normal size, a bit chonky but not a giant. They do get giants in though, they had a couple in the last shipment 😀 No, just scape straight from the shop 🙌🏻

Down to x2 Filters now. Smashed my External earlier today, Was making a weird noise and no water coming out. So took it apart and serviced it. Snapped the impeller shaft and then dropped it so the housing cracked and the head went flying off and parts went everywhere. Only dropped it a few...

Also, wanted to add that depending on what method you are using to return water to the main body of the tank, any fish behind the mattenfilter might be at risk. If it is an air driven lift tube then it will be no worse than a fish equivalent of a rollercoaster ride, but a powerhead or other...

Sorry, I don’t think I’m explaining myself well. Let’s say you have pure RO water and you add a known amount of KH to the water to reach a specific hardness. You record the pH. If you then inject CO2 into the water until a pH drop of 1 is achieved, the concentration of CO2 in the water will be...

Hi all, I think you are right, but it because of the log10 nature of the pH scale. This what @Jose said <"Question about pressurised CO2 and water disturbance"> and <"my reply"> cheers Darrel

Hi all, I'm never going to be a CO2 user. cheers Darrel

Hi Stock 34l fluval flex. No CO2 Aquasoil substrate. Currently 2 weeks old and cycling. Started with 2 pots Pearlweed that im replanting tops. Stock light on 9hrs a day I intend to have cherry shrimp and maybe a small 6-12 shoal of Ember Tetras. Which TNC fert should I go for? Complete or...

Thanks, everyone! I suppose the final question is about C02. I seem to read everywhere that you will find it hard (especially as a plant newbie) to maintain healthy/growing plants without it. Some have said that trying to CO2 in the aquarium when aerating (surface agitation for 30 fish) is...

this is what I ment; the buffering effect strange :crazy:. I Always assumed that with a pH drop of 1 point, to obtain (approx) 30 ppm CO2, the KH is not relevant.

Hi all, Personally I wouldn't particularity try to match them, or worry too much about exact amounts. Agreed, it is <"if it ain't broke don't fix it"> argument for me. All the time you are happy with plant health and growth? I'd just carry on with APT1, at your normal dosing. If you aren't...

Hi all, You need @ian_m, @Jose, @hax47 or @Andy Pierce for a proper comment, but this should link in to a thread <"with an explanation"> - <"Quick question around co2">. If any-one really wants the inorganic chemistry? We have threads <"Gas-exchange experiments"> & <"CO2 concentration...

I used to have very bad BBA, but that started before I dosed iron, and I found when I dosed iron heavily & increased ferts overall BBA started reducing. For me I found the biggest way to combat BBA was to reduce organic waste, by thouroughly cleaning the external filter, and multiple cleans of...

This is incorrect (sort of). The ppm of dissolved CO2 and pH drop of water are not the same thing. CO2 will dissolve in the water, however the hardness of the water has a buffering affect on the pH meaning more CO2 is required to achieve the same pH drop than in softer water. The pH drop is...

I see this being brought up occasionally. I'm not sure, but I assume that it is false that the hard water makes a difference in CO2 dissolution. Of course, I would love to be reassured on this matter by someone with a more solid understanding of the chemical process. On the other hand, it is...

Thanks all for the responses so far. :thumbup: I have also read that when using hard water you need to add more CO2 to reach the desired pH (or ppm/ph drop). Is this not correct? :bookworm:

Great! I hope you see similar improvements that I did :)

I think long term you are going to have to think of a way to eliminate these gaps. If the tiny gaps are big enough for fish to swim through, they are big enough for water to bypass the filter. Which kind of defeats the object of having a mattenfilter. Usually the foam would be tight enough...

I'll be there too

People who are adding CO2 before lights on are aiming at having a constant CO2 concentration in the water throughout the entire photoperiod, which is when the plants feel the demand for CO2. Many people believe that a constant CO2 level during lights on is important for keeping plants happy...

I'll be attending for sure.

Edit: I've added wider tubing to widen the gap and all is restored. I see the fish in here occasionally but the novelty seems to have worn off! Hi all, Hope you're well! Ive also posted this in the planted tank discussion forum (hope that's ok!) just to maximise people who may see it and have...

Often plants that die slowly are sold as easy plants. The scale of easy to difficult depends on the plant base that you are searching. I now grow plants that grow for me. Wife has the same philosophy with garden plants.

Hi all, Hope you're well! I have a 100l tank with a matten filter set up behind an egg crate moss wall. It's not siliconed to the tank, so that I can access for easy maintenance/easily rescape at a later date. I noticed this morning that at least 1 chili rasbora and 1 pygmy corydoras had...

In the 'why did I mess with it?' category, I think I was fine for iron and then got happy about it and started supplementing with Fe.EDDHSA. Now I'm noticing an increasing amount of BBA. There is some idea that excess iron can promote BBA which would obviously be a really bad thing. Anyone...

Check this series out for how simple it can be to set these up. Lucas is a bit of a funny character but there's some good info in these vids.

After our discussion at the UKAPS Horizon Aquatics event, I too have got this on order to try out, will let you all know how I get on

I have two old tanks, both around 300litres, made from 10mm glass which are outside but slightly protected by walls. One has been outside for 15 years through some bad winters and despite being frozen solid occasionally is still surviving. I use them for dapnia and have heen plagued by thread...

In addition to whatever iron is in my All-in-one, I am currently adding 0.5ppm DTPA iron per week. I am now looking at reducing this to 0.16ppm DTPA iron, and if that all works well, may eventually try only relying on iron in All-in-one.

The way the lava rock blends into the front looks much better now , great job!

Hi all, It isn't the alkalinity of the water in the tank that's relevant. That one. It is only the carbonate hardness of the <"4 dKH solution in the drop checker"> that matters. The base in solution (sodium bicarbonate (NaHCO3) etc.) is the <"proton acceptor">. Because the drop checker has...

You need to give actual tank dimensions for someone to help you.

Welcome aboard :)

The final version, just will add some green rotalas kn the right

Went to the waterfall today, plants in the pictures are Leptochilus pteropus “red” and Schismatoglottis sp. .

I thought maybe they'd just mis-understood my e-mail, but you're probably right!

I’m fairly sure my notion that there was an updated version was garnered from a comment on this forum somewhere? I think we can probably trust what Oase have said though.

... which suggests the pump cover has not in fact been updated.

Hi all, <"Taiwan Bee not so nano"> cheers Darrel

The water averages around 20 mg/l of nitrates which is fairly high, suggesting a lowland catchment including runoff from fertilisers used on farms. Would likely have some level of all other nutrients typically used in fertilizers, including macronutrients potassium and phosphorus. In fact they...

I used to have a 90cm wide tank and kept a group of six. Remember vividly how they used to dash frantically when startled at times, and I did loose a few due to head injury, hence my previous question about tank width. Pity I can't keep ottos in my current nano set-up; my tanks are less than...

The report does show iron, magnesium, nitrate and nitrite. It doesn't show phosphate as it's not a requirement to do so.

Well I got a reply, sadly it wasn't very helpful... "Thank you for contacting us regarding your BioMaster, the underside of the filter lid has changed, dependant when you purchased it you may have the new style lid, the main difference is the underside is now slightly concaved this encourages...

Thank you! It does look like very little surface movement right now considering there's a Biomaster 850 on it 😄, it was far more visible until recently when the floaters took over most of the surface. I do have a Aquario Neo Skimmer running attached to the outlet, this runs 24/7 and will be...