Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up
I know high ammonia levels cause algae and high nitrate doesn't buy what about Nitrite?
I'm still cycling my tank and my ammonia levels have subsided and my nitrite levels are high.
Do high nitrite levels promote algae growth?
Sent from my ONEPLUS A6013 using Tapatalk
So I have good news, after doing multiple tests spread throughout the day I'm glad to say that my cycle has transitioned to the next stage and I no longer have high ammonia readings (my tests have shown 0.2ppm) and I have 8ppm Nitrites.
My question now is Do I have to do excessive water changes...
Hello guys, I've been trying to grow alot of different house plants out of my aquarium water with alot of success. I do it more so for the aesthetics but it is helping greatly with water quality as well.
All the plants showing in the picture are rootings and growing just fine however the only...
Would you say now is a good time to trim the monte carlo or should I wait a couple weeks for it to grow a bit fuller?
Sent from my SM-S918B using Tapatalk
I have to do daily water changes for several months ?!. Damn I knew I should have been patient and continued the dark start
Sent from my ONEPLUS A6013 using Tapatalk
I'll test my tap water tomorrow morning but may I ask why you guys think test kits arent good?
I can't really describe what too much is but sprinkled quite a lot of miracle gro pellets on my substrate and then capped over it with tropica substrate and tropica aqausoil (which I'm told also...
My water test kit arrived today and the readings are interesting.
Ammonia 10ppm
Nitrite 8ppm
Nitrate 40ppm
The good news is my tank is cycling (it's only about 3 weeks old) the bad news is that it seems like it's gonna take a long time to finish cycling.
I have been doing daily 70% water...
Damn that's really annoying that these companies mis label these plants. What a waste of money. Guess I'll have to replace it
Sent from my SM-S918B using Tapatalk
1. 25L 40cmx25cmx25cm
2. Tank's been running for a week with plants
3. Don't have information about all parameters yet until my test kit arrives tomorrow but the last time I tested my water at petsathome, which as about 4 days ago, the results were:
Ph: 7.5
Ammonia: 8ppm
Nitrite: 0
Nitrate: 0...
I've only had this stem plant for a few days and it's the only plant that's showing signs of struggle.
The older leaves are yellowing and the new leaves are green but have small black holes. (Holes are also on the old leaves as well).
Other plants such as Java fern, anubias, monte carlo...
Thank you for your responses. I'll hold off on the excel then. My Vallisneria nana is still looking good so I don't want to ruin it.
Sent from my SM-S918B using Tapatalk
I've seen some mixed opinions on whether I can use excel with moss but more specifically Vallisnera sp.
Is it okay to use with these plants or not?
Sent from my ONEPLUS A6013 using Tapatalk
Thanks but that doesn't really answer my question. I'm asking roughly how long it takes for the moss to transition? Weeks or months?
Sent from my ONEPLUS A6013 using Tapatalk
I attached weeping moss to parts of my hard scape but it came in emersed form. Some moss is on the wood which is closer to the light whereas moss on the lava rocks is partially shaded by the java fern trident hanging over it.
How long roughly does it take for it to transition to submerged form...
Im asking this question as I know bacteria will be on pretty much all surfaces inside the tank (plants, hardscape, substrate) and in the filter on the media (sponges and rocks).
But do I really need to have bio media (eg lava rock/seachem matrix etc) in my filter and instead just run sponges...
I planted my new scape about 4-5 days ago but I haven't dosed it with any ferts yet. Most of the plants were grown emersed so there is a bit of melt in some plants (eg monte Carlo and hygrophilia) but it's not excessive. But at the same time these plants are showing signs of new growth.
Due to...
I do live in London. South East in Thamesmead. I would love to get some old media if it will help speed up the process.
I'm mainly doing it to avoid algae and save money on the water bill
Sent from my SM-S918B using Tapatalk
So after many many years I've decided to comeback into the hobby. I've got the tank setup and running (soil and hardscape all setup).
To avoid algae issues and constant water changes I decided to go through the 'Dark Start' method where you cycle the tank with no plants and light.
I did add...
I read that having the lights low when the plants are transitioning help to reduce the out break of algae.
Im using a combination of miracle grow all purpose granules, tropica plant substrate and fluval stratum. It's not as nutrient rich as ADA but it was all I had lying around in my house...
So you've planted a bunch of in-virto plants and have flooded the tank. You got the co2 running, lights on and filter flowing. Now what?
Currently with my tank, some of the plants are melting back (which is to be expected), the light is on the lowest setting running for 6 hours and co2 is on...
It's a new tube that hasn't been used yet and no it's not running.
Right now I'm using my spare single stage reg which is working fine.
Honestly this push fitting is a really stupid idea when we are dealing with high pressure systems
Sent from my SM-G930F using Tapatalk
Hello, I've run into a really annoying issue with my regulator. The stupid c02 tubing keeps popping off the push fitting. I had my psi set to 40 and I'm using an intank bazooka diffuser.
Is there a way to remove the push fit and replace it with a lock screw fitting instead?
I had to remove the stupid redmoor wood as it was building up green white and stringy mold on the surface. None of the other plants or rocks seem to be affected.
I've also decided to leave two vent holes while still doing 7 minute air time everyday.
After re misting it a few hours ago the wood has gone dry again. Tbh it's not a lot of moss since it's just small chopped blended parts.
On the positive side, after two days I'm actually seeing growth on some of the carpet plants and the moss on the lava rock is still damp.
After the 2...
In that case I'm alright. I'll let the moss dry out because the last thing I need is too much moisture to the cause mold.
Like I said I have also of extra moss that I didn't use
That's just wonderful. And I actually soaked the wood for a good 3 weeks. Fortunately I saved some of the left over moss in containers I have misted and left near the window to grow so I can re use it when the tank is read to be flooded.
I actually though high temperature was a bad thing. I now...
@Tim Harrison did your moss ever look as dry as this
My hygrometer is saying the humidity is still 99% but the moss on the wood looks really dry. The ones on the rocks still look damp
I'm using a combination of miracle gro all purpose pellets the bottom, 1 litre of tropica plant substrate and it's caped off with 4L of Fluval Stratum (Normally I would use ada Amazonia but my LFS that sold them cheap moved and I forgot the new address)
Well I've done it..sort of. I finished planting all the carpeting plants (took a good 2hrs but was nice an relaxing). I had so many plants that I couldn't plant them all so I have them stored in plastic containers near the window with the same substrate setup as my tank.
Unfortunately my...
I bought these to plants and I was informed that crenata grows smaller than hirsita but from the packs I got it's the opposite.
You think the person made a mistake and put them in the wrong bags or is this just normal?
He there, I live in South East london as well and recently bought wood for my nano aquascape I'm doing.
I bought this wood from eBay cause no shop had the detail I wanted. Just type "redmoor wood" into ebay and you'll get plenty of options.
Shops you can get wood and rocks from are:
Wholesale...
Thank you guys so much for the advice and help. My small desk light arrived (which I'm using in a different tank) so I'm now able to use my old beamswork led unit for dry start.
Hopefully during the next 6-8 weeks my
Chihiros a-series unit arrive and ready for when I flood it. Fingers crossed...
Right so then would it be a good idea for me to just leave a small permanent opening on the film to make sure it doesn't get to humid, while still opening the film every day for 5 minutes?
Thanks Tim, I actually read all the pages of your journal for that tank yesterday as well and It was very helpful. Nothing short of amazing
I did read however that misting the plants, more specifically the carpeting plants actually causes the leave a to rot due to water droplets sitting on the...
I'm preparing to do a dry start method with both carpeting plants and mosses (since they will all come in their emersed form).
I literally spent the whole of yesterday reading articles, forum posts and videos on this method and there is a lot of conflicting information which is confusing me...
I've been reading and watching videos to recap on this hobby again after a long break
I saw a video where someone said that I have to do water changes everyday for the first week, then every other day for the next 3 week's. Then after that I can do weekly water changes.
Is this necessary...
So I decided to come back after about 3 years, I looked through my old equipment and saw that I still have my old Marco and micro mix in a bottle. Can I still use them after three years? If I recall I pre mixed it with ei ferts and used pure ro water
Cheers for that.
So far I have cleaned my filter and removed all the brown algae in the tubing etc. Cleaned my diffuser, removed as much physical algae as I could and decreased the lighting significantly.
Hopefully my plants will recover and things can start moving again
Right so I started a new scape a few weeks ago and at the start it was good. The monte carlo carpet was growing fast and the moss was transitionin well.
Then after 1 1/2 weeks I decided to dose my ei ferts (I hadn't used it in several months). A few weeks later I get this brown algae plague. I...
Hello Aquascapers, I have come back from a long retirement from this hobby and decided to rescape my dull tank.
My current idea for the scape:
-use a mix of weeping moss and spiky moss on the lava rocks
- use flame moss for the rear of the tank
- have a mix of monte carlo and DHG in the front...
There was a time I dosed 5x the recommended amount of excel in a tank filled with shrimp. Didn't do a thing to then.
Sent from my GT-I9505 using Tapatalk
Give it time. My monte carlo and HC melted but then exploded in growth afterwards. Took a few months though for the carpet to form. But make sure you have sttong flow and stable c02 levels.
Sent from my GT-I9505 using Tapatalk
I cant seem to beat mine but i have come to a temporary truce. It doesnt grow on my plants. Only my bonsai trees.
It gives a really nice aged look. As if a weird fungus was growing on it. I dont mind it. But i think when i put fish and shrimp back in the tank again it will dose some diy excel...
I started with a glass diffuser but saw that it was creating big bubbles and would break really easily.
I went through a couple of those until i moved to the bazooka. This is a really nice diffuser, especially when its next to high flow. The mist is nice and i was able to lower to bubbles per...
Well i can say my tank is literally growing its self now. After i purged the dwarf baby tears and monte carlo carpet. Alot of other plants died and had to be removed. But after a few weeks something really cool happened.
Out of the flames, a new carpet plants started to tank over. Dwarf...
Unfortunately my pictures are on my broken iPhone so can't get them back. I could use my Sony but the quality is pants.
Sunday evening I will do an update on my post or create a new one entirely.
Sent from my D2303 using Tapatalk
Ahhh yes I took that down long time ago and actually made a new setup. It was going well but then I got carried away with another project and neglected the tank. Once I deal with the algae I will show my new forest scape.
So far it's my favourite since the scape really feels really instead of...
Yeah, so I got a bit lazy (more like lost interest altogether) and didn't keep up with my maintenance. And ohhh how I have been punished for my sins.
Because I had my co2 off for months, lights on for 10hrs, zero nutrient dosing and zero water changes, my tank is more of an algae garden than a...
Well I was using 4bps with my dumb glass diffuser then I was able to cut it does to 2bps when I switched to bazooka diffuser (note my drop checker Is always yellow so I could go lower).
I need to clean my inline diffuser then use it at 1.5 bps to keep my drop checker yellow.
Sent from my...
Yeah I need to clean the hoses again.
Though wouldn't using a hose cleaner in a diffuser damage the ceramic?
In fact how do clean these inlines where you can't remove the disk
The issue is that this problem started only recently. So building pressure and being patient isn't the issue.
I'm switching to my intank bazooka. But I will test the inline diffuser with my spare regulator and co2 tank
Sent from my D2303 using Tapatalk
this is the one i use: http://www.co2supermarket.co.uk/inline-atomizer-co2-diffuser-intense-12-16-tubing-p18.html
could i have a link to the old version please
At first I thought it was a problem with the regulator but when I replaced it I still got the same issue. The bubble rate will decrease right after I increased it.
So I did a test with different bubble counters and check valves I had lying around. With all of the combinations I did, the bubble...
Thanks man
I have actually got my staghorn issue under control. I cleaned my tubing, increased my water changes and filter maintenance. Also I increases my flow and co2.
I also bought an inline diffuser for better diffusion
Well this update is more of a bad day.
So after buying my new regulator, thinking my old one was broken, I discovered I had a leak. The issue was that I honestly couldn't find it.
At first I thought it was my check valve because the plastic screw had cracked
But when I replaced it with my...
I bought a new regulator since oil got into my old one. For the first day it was fine. But then afterwards I couldn't increase or decrease my bubble rate using the needle valve.
Could there be a leak in the regulator?
Sent from my D2303 using Tapatalk
Quick update.
So far not much has changed with the scape except for a few things.
My battle against various algae seems to be going rather well. After doing a three day blackout, increasing flow and co2 and spot treating my plants with a 50/50 mix of h202 and excel all the algae is...
I see. Damn due to my stubbornness I bought another batch of grass with some root tabs.
But I have taken your message and I will do things that way from now on. Cheers
Sent from my D2303 using Tapatalk
I'm having a weird problem. I'm finding it a lot easier to grow Eloecharis A way easier than Eloecharis P even though P has access to more flow, co2 and has good light the plant is stunned in growth. I end up buying new pots and batches of grass to replant but I still have this issue. Mind you...
So far im happy with the growth, I just need to deal with the regulator and algae business.
Also I am very happy with the misting from the online diffuser.
Sent from my iPhone using Tapatalk
Sunday update.
So after discovering that my staghorn algae issue was slowly creeping back I decided to take action by dosing 2-3x of excel on the mosses and grass most effected, mowed down the grass(including the infected grass) , did a 50% water change and increased my flow and co2 rate...
Yeah I noticed a similar thing. Before my temperatures were around 26c and I would see shrimp everywhere with a lot of pregnant females, but since I lowered the temp for better plant growth (21-23) their breeding rate is slower
Sent from my iPhone using Tapatalk
I just enjoy it because it feels like your creating your own world and managing the life within it even to a microscopic scale
Sent from my iPhone using Tapatalk
It's fine I already bought an intense in line diffuser from co2supermarket (I get more discounts with them). It's been running perfectly so far. Noticed new froth from my dwarf hair grass and mosses
Sent from my iPhone using Tapatalk
Update
So my inline diffuser came today
I was weirdly surprised at how big it was, thinking I bought the wrong size.
But any ways, it took me a while to hook everything up since it was my first time.
I read a lot about inline diffusers and that a lot of them have leak issues especially...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.