river manifold

[Andy Thurston]

Hide it all in corner with some hardscape. That pipe looks big enough not to reduce flow. Is that a removeable end cap to the right of pick up pipes?

 

[biffster]

it as a removable end cap at each end to allow
access if it gets blocked

 

[Andy Thurston]

Good idea! It will probably need cleaning every 6-12 months Lets hope roots dont overgrow pipework too much. Its ashame end cap fitting is as long as it is. Its a bit late now but you could leave the elbow unglued for cleaning because the suction from filter would hold it togeather then you could get pipes tight in coner.
When do you plan to test it?

 

[biffster]

Good idea! It will probably need cleaning every 6-12 months Lets hope roots dont overgrow pipework too much. Its ashame end cap fitting is as long as it is. Its a bit late now but you could leave the elbow unglued for cleaning because the suction from filter would hold it togeather then you could get pipes tight in coner.
When do you plan to test it?

i am leaving it unglued it is a good interference fit its air
tight even with out it being glued i am going to get a cleaning
brush . i can get one on the end of a long flexible spring and should
be able to clean the pipe without removing it i already have a brush i
can get down the pick up strainer pipes so just about covered that