Hi guys il be planting my tank next week im just abit confused about dosing ferts.should i start dosing from day1 or should i wait a few weeks? Iv been adviced by tgm to wait 6weeks before dosing ferts.just want other opinion on here. Im using ada substate and powersand s with penac p penac w tourmaline bc clear supper and bacter 100 i will be using co2 and its a fluval edge 6g. Thanks
-
You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up
new set up when to start dosing ferts
- Thread starter rehman73
- Start date
Hi rehman73
I always dose mine from day 1.
I just can't see the point in risking any shortages when you want to get your plants off to the best possible start, although with your expensive substrate you would be able to reduce dosing if you wanted to.
I've never had any problems dosing full bore from day 1 😀
I always dose mine from day 1.
I just can't see the point in risking any shortages when you want to get your plants off to the best possible start, although with your expensive substrate you would be able to reduce dosing if you wanted to.
I've never had any problems dosing full bore from day 1 😀
Matt Warner
Member
+1 to what ceejay said. There is no harm in dosing ferts from day one, this way your plants will get the best start possible and won't run into deficiency problems.
I posted a question on Tgm website in the ask question section i dont know who replied to me but anyway the guys are experts and they know what they talking about only thing left me thinking is that alot of people on here starting dosing from day1 so just was a little confused.only reason iv gone full wack ada is due to the lack of experience and knowledge i have,its my first tank so i wanted i good start my next tank im going to look into a cheaper option ada stuff is good but damn expensive bank balance is really low now. 😀spyder said:
Polyester
Member
I read that it was good to wait before starting....big mistake, got major deficiencies showing after 10 days and have trouble getting the balance right after. My tank have only been up for 2 weeks though.
Would suggest from day 1
Would suggest from day 1
rehman73 said:
If you have gone "full whack ADA" then you also have the ferts? I've never used them but I believe they are lower concentrations than that supplied by the average EI user and come in many flavours for different times during a tanks development. They should also have instructions for use. I recall reading about them some time back, there is one to use at the start, something else to use after a big trim, another to use when the dogs had kittens blah blah.
I suppose if the substrate had a good nutrient load then you may be able to go without ferting for 6 weeks. Whether this is ideal for your setup would be another story.
Bottom line is. Excess ferts, no real biggie. Shortage of ferts, = problems.
Thanks polyester for sharing your experience hope it goes well for you cheers.Polyester said:I read that it was good to wait before starting....big mistake, got major deficiencies showing after 10 days and have trouble getting the balance right after. My tank have only been up for 2 weeks though.
Would suggest from day 1
The main reason for advising you to hold back on ferts. would surely be to not run into algea problems. As long as your other parametres are under full control, you can dose from day one,ofcourse adjusting to amount of plant-mass. If you are not totally in control, however, it's guite good advise, to "underdose" a little in the upstart fase.
Mick.
Mick.
Tim Harrison
Member
I'd dose from day one. nothing ever dies of an overdose, except from Hollywood film stars!
Thanks Mick,i am going to plant the tank up one time so it will be heavily planted only thing that i am concerned about is that the plants im using are all slow growers which means they dont take up nutrient up as fast as the faster growing plants such as the stem plant since you have mentioned 'algea problems' im thinking now i might have algea issues due to excess nutrients in the water column as well as what the ada substrate leeches out on the initial setup.Im might just leave the tank for a week or two whilst im doing the massive water changes and keep a close i on the tank if i see any difficiency in the plants then i might start fert with Ei.What you reckon guys im in two minds now?Mick.Dk said:
Tim Harrison
Member
This article of Clive's should be of help http://www.ukaps.org/EI.htm, especially the section - "Won’t all these nutrients cause algae?"
Hi all
It's when you underdose you get all your associated algae problems.
rehman73
You will never have algae issues due to excess nutrients in the water column. However, you may have algae issues when your ADA substrate starts leeching ammonia. Ammonia + Light = Algae...............guaranteed, so you need to keep on top of the water changes at the start.
One of the problems with a planted tank is that once you get algae, it actually feeds on the very same stuff that you are dosing for your plants. Our problem is the 'trigger'. If we remove the 'trigger' then no algae. We do this with our maintenance and water change regime, then you can dose as much as you like.
I have run double EI values in a tank for 9 months with no algae, and there is someone round here who has dosed even more than that
(you know who you are 
) .
It so happens his tanks look 10x better than mine
Personally, you don't need to worry about uptake rates (as long as you are exceeding them), so I would just dose from the start.
The article Troi links to is a fantastic read. If you can absorb that lot, you will see the light :idea:
This is incorrect.Mick.Dk said:
There is no valid reason to underdose a tank...........ever. We are trying to grow aquatic plants here and aquatic plants need nutrients, and always will.Mick.Dk said:
It's when you underdose you get all your associated algae problems.
rehman73
You will never have algae issues due to excess nutrients in the water column. However, you may have algae issues when your ADA substrate starts leeching ammonia. Ammonia + Light = Algae...............guaranteed, so you need to keep on top of the water changes at the start.
One of the problems with a planted tank is that once you get algae, it actually feeds on the very same stuff that you are dosing for your plants. Our problem is the 'trigger'. If we remove the 'trigger' then no algae. We do this with our maintenance and water change regime, then you can dose as much as you like.
I have run double EI values in a tank for 9 months with no algae, and there is someone round here who has dosed even more than that
(you know who you are ) . It so happens his tanks look 10x better than mine
Personally, you don't need to worry about uptake rates (as long as you are exceeding them), so I would just dose from the start.
The article Troi links to is a fantastic read. If you can absorb that lot, you will see the light :idea:
Sorry to have brought you more confusion rehman
I simply missed you'd be using the E.I. principles, and wasn't aware there was a text explaining those fundamentals in such an accesable way, laying around here.
I does ofcourse not disagree, since the principles are basic!
Another lesson in communication learned for me, and hopefully not too much frustration for you.
Mick.
I simply missed you'd be using the E.I. principles, and wasn't aware there was a text explaining those fundamentals in such an accesable way, laying around here.
I does ofcourse not disagree, since the principles are basic!
Another lesson in communication learned for me, and hopefully not too much frustration for you.
Mick.
Hi how should i does the Ei macro and micros when i will be doing large water changes due to the ada substrate leeching out high amounts of ammonia.If i do a water change every day in the first week then will i need to add micro or macros each
time?
time?
