Hello,
I'm very sorry to hear this.
If above suggestion didn't help.
This could be due loose spring or dirt inside solenoid. If you feeling comfortable with basic DIY you could perform below steps. Alternatively send email to
support@co2art.co.uk and we arrange repair for you.
Please follow below steps to fix it:
- Disconnect regulator from the cylinder,
- release all gas from the regulator
- remove electric coil from solenoid
- unscrew two small screws from the bottom of solenoid
- inside you will find spring, and piston, please make sure at the end piston is clean
- stretch spring so it will be around 0.5cm longer
- assemble everything back together
- make sure all connections are tight as originally
- test it
Let us know if this solved your problem.