TMC twin gauge reg pressure?

[Reuben]

Currently using an adjustable pressure regulator but I've a fault with the solenoid.

Can anyone confirm if the TMC twin gauge reg (2 bar fixed pressure) has enough pressure to run a UP inline atomiser and control the bubble rate sufficiently?
Thanks
Reuben

 

[Lee Sweeting]

Hi Reuben! Yes the TMC reg is fixed at 2 bar, however it didn't have any problems running my up atomiser.

 

[Andy Thurston]

Just buy a new solenoid for the reg you already have it should only cost a few quid. Co2 art will probably supply one

 

[Reuben]

Just buy a new solenoid for the reg you already have it should only cost a few quid. Co2 art will probably supply one

Had a look, they don't look as though they'll fit.

Hi Reuben! Yes the TMC reg is fixed at 2 bar, however it didn't have any problems running my up atomiser.

That's excellent, thank Lee.

Another thumbs up for Aqua Essentials who offered to replace it for me at no cost, even though it was bought quite a while back. Cannot recommend that shop enough really!

 

[darren636]

my £90 tmc reg will not power my inline properly. needs constant adjusting. load of crap.

 

[terry82517]

Mine works fine too on the up.

 

[tim]

my £90 tmc reg will not power my inline properly. needs constant adjusting. load of crap.

Sell it too me

 

[Andy Thurston]

Had a look, they don't look as though they'll fit.

just unscrew the fitting, they should be the same thread as the one on your reg