Chriseb1
New Member
Have a CO2 Art Pro se regulator but the solenoid valve is passing tried numerous things but all have failed, looking for suggestions for a replacement
-
You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up
Solenoid valve
- Thread starter Chriseb1
- Start date
MoFish
Member
Are you sure it's the Solenoid valve pasing? Make sure everything is screwed tight and check again.
If you know for definite it's leaking from the valve, follow this procedure. Solenoid Verification Procedure
If parts of the valve assembly are dirty, clean them with Isopropyl Alcohol and a Q-tip.
I had a similar issue and this seems to have solved it for me.
If you know for definite it's leaking from the valve, follow this procedure. Solenoid Verification Procedure
If parts of the valve assembly are dirty, clean them with Isopropyl Alcohol and a Q-tip.
I had a similar issue and this seems to have solved it for me.
Chriseb1
New Member
Definitely the solenoid and already stripped and cleaned. Need to find a replacement but not overly impressed with the quality of the original.
MoFish
Member
I think next time I need a CO2 reg I will likely go for a different brand too.
Bradders
Member
I have had the Strideways Dual Stage for 3 months and its (thus far) been set and forget.
This was recommend to me by Aquarium Gardens and George Farmer due to their experiences, and I have not been disappointed since its installment.
This was recommend to me by Aquarium Gardens and George Farmer due to their experiences, and I have not been disappointed since its installment.
