Fx4

[Warren]

Anyone know with the fx4 of you are able to add clear tubing as an alternative to the black piping. As wanting to setup an opti white rank. As the black nozzles and intakes versus a lily pipe I assume wouldn't look too great.

 

[Ryan Thang To]

Hi
Yes sure. I don't see why not. Ebay has loads for sell

Cheers
Ryan

 

[ian_m]

The other issue with FX4 (and FX6) alternative piping is that for FX4 the alternative PVC tubing is 19/25mm. You can also get 19/22 PVC tube (standard wall) but is very very prone to kinking and crimping and folding. At these diameters it is also better to get reinforced PVC tubing to prevent kinking.

You will have severe difficulties bending round 19/25mm tubing over the rim of your tank, unlike Fluval flexi 19mm supplied tubing, so you will be looking at making something like this to get into the tank.

 

[doylecolmdoyle]

I was looking at running a fx4 or 6, looked high and low but there are no glass or stainless pipes to fit this size tube you will need to reduce it down from the 25mm tube to 16/22 which will reduce the flow... in the end may as well get a filter that runs 16/22 mm pipe stock.

 

[ian_m]

See Zeus's journal for how to "correctly" plumb in large diameter piping into heating, CO2, CO2 reactors and not restrict the flow.
https://www.ukaps.org/forum/threads/olympus-is-calling.43046/

 

[Zeus.]

I did a pipe clean out last week and it took about 6 hours to strip it all the pipework out clean them all and refit. had couple of minor leaks on first fit. But my tank is a room divider so it is tricky as all pipes fit in very narrow space