• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

ei dosing without co2

tonyg1

tonyg1

Member
Joined
4 Jun 2011
Messages
63
what recomendations do any of you have as to the amount to dose without the use of co2(only for the time being),i'm relatively new to the world of aquarium plants and i've just overhauled my tank,new filter lighting etc.so cash is a bit a short for a week or so but i want to give them a good start whilest i get co2 kitted up.
 
Hi tonyg1

The ferts are relatively easy to sort out but your biggest problem is going to be your lighting. If you can, I would reduce that lighting to 1 tube if it can be switched independently, (not likely on the Rio), if not, diffuse the lighting somehow or raise the light fitting up, and definitely remove those reflectors. At the same time you will only need 5-6 hours of light per day on a newly set up tank, and increase it by an hour a month until you reach your target.
Once you get your lighting reduced you will not need to dose EI levels of ferts (although it won't do any harm, just a bit of a waste, that's all). I would start with about 25% of EI levels and that will be more than enough to keep your plants going in the lower light.
 
Thanks for the reply ceejay,so I thought for 10 seconds about your response so I've gone for the co2 option and I have my fe and regulator I'm just waiting for my defusor and drop checker and all should be well(hopefully) and set up at the weekend.
 
Hi tonyg1

Sounds good 😀 .
I run a Rio 180, and like yourself, added reflectors at the beginning of my planted tank journey, but that was before I learnt about UKAPS (and had the Matrix telling me that plants need lots of light to grow :lol: ).
My tank now runs with no reflectors and I've even diffused the remaining light. This has slowed the growth to a much more calmer pace of life. I'm not up to my armpits in water so often, trimming the plants 🙄 .
Much more manageable 😀
 
well i've got every thing now except it seems my defusor came with a pipe for use with a welder and as such i need to come up with a way to reduce the width of the pipe from the regulator to the bubble counter no biggy though.i've had to spend the weekend sorting out the stream for the pond so i'll get on with it during the week.

in ukaps history has anyone actually lost a limb during the fe set up :lol:
 
Froze my fingers to the bottle trying to use a halfords disposable welding bottle while welding but never had anything bad happen with a FE.
Tom's link is a great thread that I'm still taking in but regarless is extremely informative on the non-injected side of matters.
 
You must log in or register to reply here.
Back
Top