• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

Deficiency h. polysperma

Jake101

Member
Joined
28 Feb 2014
Messages
135
Location
Solna, Sweden
Hi,

Before starting to adjust ferts, I wanted to get an opinion on the deficiency. Visible on hygrophila polysperma, affecting only older leaves. My guess from the deficiency guides is anything between potassium, phosphate or manganese. Potassium is my first choice, though.

No pressurised CO2 or Excel. I use weekly ow light EI regime with CMS+B.

93d94436-9b53-446f-8f35-3722907c32c8.jpg
 
I have Seachem Flourite Black Sand with Seachem root tabs. I have measured about 20-25 umol on the substrate level.

I'll try with K first.
 
Hi
My guess is Magnesium...this plant loves regular water changes...if you don't do them it will suffer...if you have low Magnesium in your tap water it can be depleted quickly!
Cheers
hoggie
 
I'll change about 30 % weekly. The water is relatively soft, about 4-5 dH. According to the water company the tap water has 22 ppm Ca and 7 ppm Mg.

Edit: I made some quick calculations, based on the simplified assumption that plants use all ferts before the weekly water change (and adding ferts). This way I get the lower limit for the amounts right after the wc. I naturally know that NO3 is at least 10 ppm and PO4 1 ppm right after (low tech weekly EI regime).

Ca - 7 ppm
Mg - 2 ppm
K - 14 ppm
 
Last edited:
Can you post some follow up pictures. Very curious to see results...
 
Mechanical damage to plants usually indicates one of two things, carbon deficiency or hungry/nibbley fish. Try dosing Excel I small doses.
 
Mechanical damage to plants usually indicates one of two things, carbon deficiency or hungry/nibbley fish. Try dosing Excel I small doses.

What are the possible solutions if it is carbon deficiency and I am not keen in adding Excel? Less light?
 
Back
Top