2Bar CO2 Reg

[Piper]

Hi all I need a 2bar Reg to go on my FE as my current one is fixed at 1.2 bar and wont work on my new atominiser.
Thanks Piper

 

[bigmatt]

are you looking for recommendations? Look for any reg with an adjustable output pressure and it should do it! Hope this helps, Matt

 

[Piper]

Yeah I was looking for someone to recommend one that they used on a similar setup and found it to be good. Thanks

 

[Alastair]

I use an up aqua a164 working pressure adjustable off eBay and it's working fine so far. There is a newer model on there too for the same price. I received it within a week from hong kong too..should be fine on fe. I'm using mine on a pretty big co2 cylinder.

 

[Piper]

Thanks for the advice. Do you know is the 165 is better than or newer then the 164? They are both from the same seller

 

[Alastair]

The a165 is the newer one and doesn't require an Alan key to adjust the working pressure. There roughly both the same price too. I'm going to be running two cylinders on my tank shortly and will be getting the newer one.

Alastair

 

[Alastair]

Ps I'd go for the newer one, as not sure if it's a one off but my working pressure seems to fluctuate very very slightly.

 

[Piper]

Nice one thanks

 

[Alastair]

ley me know how you get on with it

 

[bjorn]

These guys in Germany make some great CO2 equipment. I just started using their Regulator and it can adjust the working pressure well above 2 bar. The site is German but they deliver to the UK and takes about a week for delivery:

http://www.aquamas.de/index.php